Size: 130*75*40
Operation temperature: 0+60

Storage temperature: -40+70

Relative humidity: 10%90%

Voltage: DC 12V

Power consumption: 5W

2ports network extender, 10M, 300M transmission distance, UTP Cat5e.

Please note before installation:

1. cable line whether correct( It can make this device as the HUB routing )
2. whether make the corresponding direct or cross network cable into correct interface
3. power supply whether is normal ( Power light is normal)
4. whether set the network card automatically as 10M/100M ( Turn Click: My computer- Contral panel- System- Hardware-Device Manager-Network Card Properties- Advanced-Value set)
5. Check the IP address of terminal computer setting, to avoid conflict with the network
6. Sometimes, it needs tens of seconds which could connect automatically
7. In case of device connected and the signal indicator light, however, it is block-up. Only needs to shortened a few meters of the cable.
8. Since the product is that down-side and up-side each are 350 meters to achieve the transmission of 700 meters, please be placed in the effective regulation within the maximum transmission distance should put it in the middle. (the up-side longer than the down-side length of 30 meters)

Note: This product is for indoor useful type, such as place it outside, there must be strict moisture, rain, etc. and good fixed measures, or they will short circuit, damaged.

 Customer Satisfaction

Please don't hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.